The Pump Set is suitable for thin-bodied, aggressive and non-flammable media. Perfectly suited for the extraction or decanting of mineral oils. • Media examples: Diesel, heating oil, hydraulic oil, machine oil and motor oil etc. • Pump tube equipped with Lutz original hand wheel • Suitable for filling or decanting alternative fuels Features & Advantages • Optionally with electric or compressed air drive • No lubricants and therefore no contamination of the pumped medium by lubricants • Optimized Drum emptying • Universally resistant ETFE shaft bearing • Maintenance without special tools • Seal modules of the seal-less (DL) pump are interchangeable * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump.The max. delivery head also depends on the pump design, motor and fluid.The viscosity values are determined with oil.
Технические характеристики
CharacteristicsFluidfor crude oil, fuel oil, diesel fuel, lubricating oilOperationelectricPrimingsemi-submersibleTechnologyimpellerMobilitystationaryDomainindustrial, chemical, for the petrochemical industry, for the automotive industry, for the printing industryApplicationstransfer, drum, drainMaterialaluminumFluid specificationfor aggressive media, for mineral oilVoltage230 VFlow
Max.: 60 l/min (15.85032 us gal/min)
Min.: 0 l/min (0 us gal/min)
Pressure
6 bar (87.023 psi)
Head
Max.: 36 m (11801)
Min.: 0 m (000)
Power
1,000 W (1.36 hp)
Input diameter
41 mm (1.6 in)
