This network adapter has four 5Gbit Ethernet ports to enable communication with 5Gbit, 2.5Gbit, 1Gbit and 100Mbit cameras, as well as other devices. Familiar Cat-5e / CAT-6 twisted-pair copper cable and RJ-45 connectors will keep installation costs to a minimum.
This camera has been tested by Neousys to be compatible with leading 5G camera manufacturers. The card performed without error during a 100-hour full-load test.
This adapters IEEE 802.3bz PoE+ capability enables powering devices over Ethernet, with 25.5 W available per port. Power to each port can be independently switched on and off via the free software API.
Технические характеристики
Electrical
| Bus Interface: | 4-lanes, Gen3 PCI Express interface, compliant with PCI Express Base Specification Revision 3.0 |
| # of 5G Port: | 4x 5GBASE-T Ethernet ports by four Marvel AQC111C 5G controllers, supporting 5G, 2.5G, 1G, 100M link speed |
| PoE Capability: | In compliance with IEEE 802.3at-2009 (PoE+), each port delivers up to 25.5 W of power |
| Power Requirement: | Maximum 5.5 A@12V (66W) from PCIe gold finger connector Maximum 8.5 A@12V (102W) with onboard 6-pin PCIe power connector connected |
Mechanical
| Ethernet Connector: | 4x RJ-45 connectors |
| Dimension: | 167.7 mm (W) x 111.2 mm (H) |
Environmental
| Operating Temperature: | 0C ~ 55C with airflow |
Connectors
| Cable Requirement: | CAT-5e or CAT-6 cable, 100 meters maximum |
Standards
| Conformance | CE Class A, according to EN 55032/55035 FCC Class A, according to FCC Part 15, Subpart B |
