The Surface Display Pro’ has been designed to provide a remote method of displaying the structure to electrolyte readings obtained from the BathyCorrometer® Pro’ on the surface. The Surface Display Pro’ (which would typically be on board a ship or on a platform) connects to the BathyCorrometer® (being used underwater by a diver) via a robust, two core water resistant cable of suitable length (supplied separately). Using a 4-20mA signal, the structure to electrolyte potential value shown on the BathyCorrometer® is mirrored on the Surface Display Unit, allowing for quick and easy verification of the structure potential. It is recommended that the Surface Display Unit (SDU) is purchased with the BathyCorrometer® it is going to be used with, this allows both units to be checked working together. Kit contains: • Surface Display Pro’ unit • mains supply lead • calibration leads from BCM to SDU • full instruction manual Also required: Two core connection (umbilical) cable (length to customers requirements) Note: The Surface Display Unit is not suitable for use with old Roxby BathyCorrometers, those fitted with Buckleys Retrofit kits or early Buckleys units. Contact Buckleys for advice. Technical specifications: Power supply: 110 to 230V AC Power consumption: 8VA Display: 4 digit LED Accuracy: 0.05% of reading Resolution: 1 in 9999 Temperature stability: 50 ppm of range/°C Speed of response: Display = 2.5 / sec Operating temperature: -20 to +50°C Storage temperature: -40 to +85°C Weight (unit): 1.6Kg Dimensions (unit): 155mm x 85mm x 265mm Packed weight: 3.2Kg Dimensions (packed): 37cm x 31cm x 30cm
Технические характеристики
CharacteristicsTypecorrosionApplicationssubseaOther characteristicsremote, robust
