Heavy duty seal-less mag drive horizontal centrifugal pump to ISO 5199 and ISO 2858 /EN 22858 100% leak free Long life cycle, reduced maintenance costs Flanges according to ISO 7005 PN 16 For stainless steel execution ISO 7005 PN20 / 150 lbs ANSI B 16.5 available Outstanding hydraulic performance High efficiency impeller Closed impeller with back vanes providing axial balancing of impeller loads Half open impeller with wear plate Easy maintenance through the Back-Pull-Out principle Atex certification Outer rotor with safety bearing Samarium Cobalt high performance magnets Containment can in Hastelloy® for limited eddy current losses Silicon carbide pump liquid lubricated internal bearings Heating jackets optional Grease or oil bath lubricated bearings PT 100 temperature monitoring Interchangeable with existing ISO 2858 pumps Suitable for Clean liquids, slightly contaminated liquids without abrasive or magnetic impurities
Технические характеристики
CharacteristicsFluidfor clear water, for chemicals, oil, greaseOperationmagnetic-driveTechnologycentrifugalMobilitystationaryDomainindustrialApplicationscirculation, chemical processMaterialstainless steel, cast iron, nickelFluid specificationfor corrosive fluids, for hazardous fluidsProtection levelATEXOther characteristicshigh-efficiency, suction, fully-enclosed, horizontal mount, heavy-duty, axial, lubricated, open, seal-less, heavy-duty, heating, waterproofFlow
Max.: 550 m³/h (19,423.0667 ft³/h)
Min.: 0 m³/h (0 ft³/h)
Pressure
Max.: 16 bar (232.06 psi)
Min.: 0 bar (0 psi)
Head
Max.: 160 m (52411)
Min.: 0 m (000)
Fluid temperature
Max.: 300 °C (572 °F)
Min.: -50 °C (-58 °F)
