Description
function pdfPOP() {window.open(‘/miva/downloads/chemetall/TI Britemor 445.pdf’, ‘newwindow’,’left=100,top=100,status=1,scrollbars=1,resizable=1, width=700, height=500, toolbar=1′) } Brochure
Britemor 445 is a clear, mobile yellow –green liquid in daylight and appears brilliant yellow under UVA light of 365 nm peak wavelength ( black light).
Typical Properties:
- Flash Point (Pensky Martens Closed Cup) : 100°C minimum (212°F)
- Viscosity 40°C : 6.8 – 7.6 cSt.
- Density g / litre at 15°C : 0.90
- Water Tolerance : 20 % minimum
Application of Penetrant:
Methods which can be used include immersion, flow-on, electrostatic, aerosol or conventional spray, brush-on and wipe-on. In the case of immersion, it is bad practice to drain on to a drip tray which allows the penetrant to run back into the tank. It is also important to ensure that the penetrant is allowed to drain from areas of entrapment caused by the geometry of the component. Ideal processing temperatures for normal use of penetrant lies between 10-35°C ( 50-95°F).
Due to shipping regulations, aerosols must ship via ground delivery.
