The sensors of the LABO-F012 family are used for monitoring non-viscous fluids (for oil or gases on request). They come complete with electronics, and are supplied installed inside a compact sensor housing of 12 mm diameter and with M12x1 round plug outlet. The 16-bit processor carries outtemperature compensation and linearisation of the calorimetric signal (measurement of the heat removal at the sensor tip by the flowing medium). The LABO-F012 electronics transmit the result as: ●Analog 0/4…20 mA signal (LABO-F012-I) ●Analog 0/2..10 V signal (LABO-F012-U) ●Frequency signal (LABO-F012-F) or ●Pulse output, pulse / x litres (LABO-F012-C) A model with switching output is available under designation LABO-F012-S. If desired, the range end value can be set to the currently existing flow using ‘teaching’. If the transmitter is ordered in a specific T-piece, it can also be adjusted in l/min. Here, it should be noted that the flow speed is measured at only one point in the tubing cross-section. ●Complete transmitter in 12 mm housing ●For various nominal tubing widths, the same transmitter ●Signal proportional to the flow speed ●4..20 mA or 0..10 V or frequency output ●Adjustable working range ●User-configurable via plug pin (teaching) ●Can be used for various tubing cross-sections ●Very simple to use
Технические характеристики
CharacteristicsTechnologycalorimetricApplicationsfor oilOther characteristicscompact, analog output
