Specification:
| Part Number | 1028953 |
| Indication: | LED |
| Vibration resistance: | 5 g, 10 Hz … 55 Hz (IEC 68-2-6) |
| EMC: | EN 60947-5-2 |
| Output load inductive: | 1 H |
| Working range (PL150): | 1.3 m |
| Wave length: | 650 nm |
| Minimum detectable object (MDO): | Parallel beam, 35 mm |
| Maximum range (reflective tape REF-PLG): | 1.5 m |
| Dimensions (W x H x D): | 35.6 mm x 199 mm x 19 mm |
| Job LED input: | PNP |
| Ripple: | |
| Weight: | 200 g |
| Circuit protection: | Output Q short-circuit protected Interference suppression VS connections reverse-polarity protected |
| Output load capacitive: | 100 nF |
| Housing material: | Aluminum |
| Initialization time: | 0.6 s |
| Ambient temperature: | Operation: -10 … +55 °C Storage: -40 … +70 °C |
| Output mode : | Q dark switching |
| Minimum range: | ≥100 mm |
| Shock load: | 10 g / DIN EN 60068-2-29 / 16 ms |
| Front screen: | PMMA |
| Technology: | Retro-reflective light grid |
| Supply voltage Vs : | DC 15 V … 30 V |
| Beam separation: | 30 mm |
| Working range (reflective tape REF-PLG): | 1 m |
| Maximum range (PL150): | 2 m |
| Protection class: | III |
| Enclosure rating: | IP 54 |
| Task: | Switching light grid |
| Connection type: | Short cable (0.28 m) with connector M12, 4-pin |
| Power consumption sender: | |
| Switching output: | 1 x PNP (Q) |
| Response time : | Parallel beam: > 100 ms |
| Number of beams: | 5 |
| Output current Imax.: | 100 mA |
| Detection height: | 120 mm |
| Current consumption job LED : | 10 mA |
| Input current: | 12 mA |
