Sick MICS3-ACAZ40PZ1
Datasheet:
- Article: 1083011
- Version: Sensors without system connector
- Application area: Indoor
- Protective field range: 4 m
- Signal field range: 40 m
- Number of simultaneously monitored fields: ? 4
- Number of fields: 8
- Number of control cases: 8
- Scanning angle: 275°
- Resolution (configurable): 30 mm, 40 mm, 50 mm, 70 mm, 150 mm, 200 mm
- Angle resolution: 0, 39°
- Rating: ? 95 ms
- Addition of protective field: 65 mm
- Type: Type 3 (IEC 61496)
- Class reliability: SIL2 (IEC 61508), SILCL2 (EN 62061)
- Category: Category 3 (EN ISO 13849)
- Performance level: PL d (EN ISO 13849)
- PFHd (average probability of dangerous failure per hour): 8.0 x 10-8 (EN ISO 13849)
- TM ( specified operating time): 20 years (EN ISO 13849)
- Safe state in case of error: Safety-supported outputs via the network are logically 0.
- Restart inhibit: ?
- Multiple evaluation: ?
- Switching the type of control: ?
- Synchronous control: ?
- Static switching of the protective field: ?
- Reliable contour recognition: ?
- Circuit as base: ?
- Built-in configuration memory: ?
- Output of measurement results: Via Ethernet
- Configuration type: PC with Safety Designer (configuration and diagnostic software)
- Configuration and diagnostic interface: USB 2.0, Mini-USB, Ethernet
- Field bus, industrial bus: PROFINET
- Indication elements: Graphic color display, LEDs
- Protection class: III (EN 61140)
- Supply voltage UV: 24 V DC (16.8 V DC … 30 V DC)
- Power consumption: 7 W (without output load)
- Dimensions (W x H x D): 112 mm x 163.1 mm x 111.1 mm
- Case material: Aluminum
- Case color: RAL 1021 (bright yellow), RAL 9005 (black)
- Shield material: Polycarbonat
- Shield surface: External surface coating is scratch-resistant.
- Protection type: IP65 (IEC 60529)
- Insensitive to external sources light: ? 3.000 lx (IEC 61496-3)
- Operating temperature range: –10 °C … +50 °C
- Storage temperature: –25 °C … +70 °C
- Vibration resistance: 0.35 mm, 10 Hz … 60 Hz (IEC 60068-2-6, IEC 61496-1, IEC 61496-3), 5 g, 60 Hz. .. 150 Hz (IEC 60068-2-6, IEC 61496-1, IEC 61496-3)
- EMC: IEC 61496-1, IEC 61000-6-2, IEC 61000-6-4
- Type of radiation: Pulsed laser diode
- Wavelength: 845 nm
- Detectable diffuse reflection: 1.8% … more than 1000%
- Laser class: 1M (21 CFR 1040.10 and 1040.11, IEC 60825-1)
- Supply voltage: 1 M12 plug, 5-pin, L-coded
- Field bus, industrial bus: 2 RJ45 sockets for bayonet connector (copper)
- OSSD pairs: 0
- Network safety outputs: 4
- Protocol: PROFIsafe
- Supported protocol versions: PROFINET V2.3 specification
- : PROFIsafe profile according to V2.6.1 specification
- GSDML: According to GSDML V2.33 specification
- Cycle time: 1 ms, 2 ms, 4 ms, 8 ms, 16 ms
- Compliance: Conformance Class C
- Network management: SNMP
- : MIB-2
- : LLDP according to IEEE 802.1AB
- : MRP client support
- Payload: Class III payload according to Security Level 1 Test
- Switch Options: IEEE 802 Real-Time 2-Port Switch
- Port Options: 100Base-TX
- : Auto-Negotiation
- : Automatic transition (MDIX)
- : Automatic polarity
- Diagnostics: I&M entries 0 … 5
- : PROFINET alarms
- Further services: PROFIenergy
- : F_iPar_CRC
- : Acyclic read/write services for communication via TCI interface
- Further interfaces: TCP/IP communication via port 9000
- Continuous shocks: 10 g, 16 ms (IEC 60068-2-27, IEC 61496-3)
- Protective field range: 4 m
- Scanning angle:275°
- Category: Security laser scanners
- Series: microScan3
