Устройство представляет собой активный элемент системы оптического барьера типа 4 (IEC 61496-1) со стандартным промышленным применением. Дальность действия — 8 м, количество лучей — 2, расстояние между лучами — 500 мм. Время срабатывания — 20 мс. Уровень надежности: SIL3 (IEC 61508), SILCL3 (IEC 62061). Категория безопасности — 4 (ISO 13849-1), уровень эффективности — PL e (ISO 13849-1). Средняя вероятность отказа в опасном состоянии в час (PFHd) составляет 6,6 x 10⁻⁹. Расчетное время эксплуатации (TM) — 20 лет. Безопасное состояние при ошибке: минимум один выход OSSD переходит в состояние ВЫКЛ.
- Item number: 1102635
- Scope of application: Standard industrial environment
- Operation principle: Active-passive system
- Part of the system: Active unit
- Scanning range: 8 m
- Number of beams: 2
- Distance between beams: 500 mm
- Rating: 20 ms
- Cap with integrated indicator light: ?
- Supply contents: Active unit, Safety instructions, Installation instructions, Operating instructions for download,
- Type: Type 4 (IEC 61496-1)
- Reliability class: SIL3 (IEC 61508), SILCL3 (IEC 62061),
- Category: Category 4 (ISO 13849-1)
- Performance level: PL e (ISO 13849-1)
- PFHd (average probability of dangerous failure per hour): 6.6 x 10-9
- T M (specified operating time): 20 years (ISO 13849-1)
- Safe state in case of error: At least one OSSD output is in AUS state (OFF) .
- Secure operation: ?
- Beam coding: ?
- Restart blocking: ?
- External device monitoring (EDM): ?
- Difference between people and materials (noise reduction): ?
- System connection: Depending on the system connector (M12 connector, 5-pin or 8-pin)
- Expansion connection: Depending on the system connector (without expansion connector or with M12 socket, 5-pin)
- Configuration type: DIP switch on the system connector
- Display elements: LEDs
- Alignment accessories: Alignment quality via diagnostic LEDs
- Indicator light: ?
- Diagnostic output (ADO): ?
- IO- Link: ?
- Near Field Communication (NFC): ?
- Protection class: III (IEC 61140)
- Supply voltage UV: 24 V DC (19.2 V DC … 28.8 V DC)
- Residual ripple: ? 10%
- Power consumption, typical: 4 W (DC)
- Safety outputs (OSSD output switching device): 2 PNP junction semiconductors, short-circuit proof, cross-circuit monitoring
- Diagnostic output (ADO): PNP output, protection against short circuits
- Dimensions: See dimensional drawing
- Case cross-section: 30.7 mm x 34 mm
- Weight: + 565 g (± 50 g)
- Protection type: IP65 (IEC 60529), IP67 (IEC 60529),
- Operating temperature range: –30 °C … +55 °C
- Storage temperature: –30 °C … +70 °C
- Humidity: 15% … 95%, non-condensing
- Vibration resistance: 5 g, 10 Hz … 55 Hz (IEC 60068-2-6)
- Shock resistance: 10 g, 16 ms (IEC 60068-2-27)
- Emission type: Near infrared ( NIR), invisible
- Typical: 0.5 m … 8 m
- Type of muting: Flexible 2-signal muting
- Simultaneity control: ?
- Selective shutdown time control: ?
- Sensor gap control: ?
- Selective overtravel shutdown: ?
- Output control: ?
- Control of import and export: ?
- End selective shutdown via electrosensitive protective device: ?
- Integration via Flexi Soft safety controller: CANopen
- : DeviceNet
- : EtherCAT®
- : EtherNet/IP
- : Modbus TCP
- : PROFIBUS DP
- : PROFINET
- State “ON”, switching voltage HIGH: 24 V DC. (UV – 2.25 V DC…UV)
- Off state, switching voltage LOW: ? 2 V DC
- Current load capacity of the output signal switching device: ? 500 mA
- Output voltage HIGH (active): ? UV – 3 V
- Output voltage LOW (inactive): High resistance
- Current carrying capacity: ? 100 mA
- Housing: Extruded aluminum profile
- Front panel: Polycarbonate, scratch resistant
- Beam spacing: 500 mm
- Category: Multi-beam light safety barriers
- Series:deTem
