Больной LFP0500-B4NMB

Specification:

Part Number	1057095
Hysteresis:	Min. 2 mm, free adjustable
EMC:	EN 61326-1:2006, 2004/108/EG
Resolution:
Lower signal level:	3.8 mA … 4 mA
CULus certificate:	+
GOST approval:	+
Response time:
Ambient storage temperature:	-40 °C … +80 °C
Signal voltage LOW:	≤ 2 V
Upper signal level:	20 mA … 20.5 mA
Housing material:	Plastic PBT
Conductivity:	No limitation
Process temperature:	-20 °C … +100 °C
Output load:	0 V … 10 V > 750 Ohm at Uv >= 14 V, 4 mA … 20 mA 12 V, 4 mA … 20 mA 15 V
Process pressure:	-1 bar … 10 bar
Probe type:	Mono rod probe
Output signal:	1 PNP transistor output (Q1) and 1 PNP / NPN transistor output (Q2) switchable, 4 mA … 20 mA, 0 V … 10 V automatic switching depending on the load.
Design:	Standard
Accuracy of sensor element:	± 5 mm
Inactive area at probe end:	10 mm
Initialization time:	≤ 5 s
Output current:
MTTF:	194.3 a (EN ISO 13849-1)
Process connection:	?» NPT
Temperature drift:
Power consumption:	≤ 100 mA at 24 V DC without output load
Medium:	Fluids
Signal voltage HIGH:	Vs — 2 V
IO-Link:	+
Inactive area at process connector:	25 mm
Protection class:	III
RoHS certificate:	+
Measurement:	Switch, Continuous
Capacitive load:	100 nF
Repeatability:	≤ 2 mm
Wetted parts:	1.4404, PTFE
Max.probe load:	6 Nm
Maximum level change:	500 mm/s
Connection type:	Round connector M12 x 1, 5-pin
Inductive load:
Probe length:	500 mm
Enclosure rating:	IP 67: EN 60529
Supply voltage:	12 V DC … 30 V DC
Ambient temperature operation:	-20 °C … +60 °C
Dielectricity constant:	≥ 1.8 with coaxial tube, ≥ 5 for mono rod probe / rope probe

Спецификации:
* Part Number: 1057095
* Hysteresis: Min. 2 mm, свободно настраиваемая
* EMC: EN 61326-1:2006, 2004/108/EG
* Resolution:

* Lower signal level: 3.8 mA … 4 mA
* CULus certificate: +
* GOST approval: +
* Response time: * Ambient storage temperature: -40 °C … +80 °C
* Signal voltage LOW: ≤ 2 V
* Upper signal level: 20 mA … 20.5 mA
* Housing material: Plastic PBT
* Conductivity: Без ограничений
* Process temperature: -20 °C … +100 °C
* Output load: 0 V … 10 V > 750 Ohm при Uv >= 14 V, 4 mA … 20 mA 12 V, 4 mA … 20 mA 15 V
* Process pressure: -1 bar … 10 bar
* Probe type: Моно-стержневой зонд
* Output signal: 1 PNP транзисторный выход (Q1) и 1 PNP / NPN транзисторный выход (Q2) с возможностью переключения, 4 mA … 20 mA, 0 V … 10 V автоматическое переключение в зависимости от нагрузки.
* Design: Стандартный
* Accuracy of sensor element: ± 5 mm
* Inactive area at probe end: 10 mm
* Initialization time: ≤ 5 s
* Output current: * MTTF: 194.3 a (EN ISO 13849-1)
* Process connection: ?» NPT
* Temperature drift: * Power consumption: ≤ 100 mA при 24 V DC без нагрузки на выходе
* Medium: Жидкости
* Signal voltage HIGH: Vs — 2 V
* IO-Link: +
* Inactive area at process connector: 25 mm
* Protection class: III
* RoHS certificate: +
* Measurement: Пороговый, непрерывный
* Capacitive load: 100 nF
* Repeatability: ≤ 2 mm
* Wetted parts: 1.4404, PTFE
* Max.probe load: 6 Nm
* Maximum level change: 500 mm/s
* Connection type: Круглый разъем M12 x 1, 5-контактный
* Inductive load: * Probe length: 500 mm
* Enclosure rating: IP 67: EN 60529
* Supply voltage: 12 V DC … 30 V DC
* Ambient temperature operation: -20 °C … +60 °C
* Dielectricity constant: ≥ 1.8 с коаксиальной трубкой, ≥ 5 для моно-стержневого зонда / тросового зонда

---