Specification:
| Part Number: 1056225 |
| Inactive area at process connector: 25 mm |
| Hysteresis: Min. 2 mm, free adjustable |
| Measurement: Switch, Continuous |
| Signal voltage HIGH: Vs — 2 V |
| Upper signal level: 20 mA … 20.5 mA |
| Accuracy of sensor element: ± 5 mm |
| Repeatability: ≤ 2 mm |
| Lower signal level: 3.8 mA … 4 mA |
| EMC: EN 61326-1:2006, 2004/108/EG |
| Conductivity: No limitation |
| Process pressure: -1 bar … 16 bar |
| Response time: |
| Initialization time: ≤ 2 s |
| Process temperature: -20 °C … +150 °C |
| Process connection: G ? A |
| GOST approval: + |
| Ambient temperature operation: -20 °C … +60 °C |
| Supply voltage: 12 V DC … 30 V DC |
| EHEDG approval: + |
| Max.probe load: 6 Nm |
| Temperature drift: |
| Probe length: 400 mm |
| Housing material: 303 |
| Signal voltage LOW: ≤ 2 V |
| 3-A: — |
| RoHS certificate: + |
| Power consumption: ≤ 75 mA at 24 V DC without output load |
| Medium: Fluids |
| Inductive load: |
| Housing design: With closed cover |
| Dielectricity constant: ≥ 1.8 with coaxial tube, ≥ 5 for mono probe |
| Enclosure rating: IP 67: EN 60529, IP 69K: EN 40050 |
| Capacitive load: 100 nF |
| IO-Link: + |
| MTTF: 194.3 a (EN ISO 13849-1) |
| Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK |
| Interference emission: EN 61000-6-4:2007 |
| Single- and continuous shock: EN 60068-2-27 |
| Output current: |
| Inactive area at probe end: 10 mm |
| Output load: 0 V … 10 V > 750 Ohm at Uv >= 14 V, 4 mA … 20 mA 12 V, 4 mA … 20 mA 13,5 V |
| Interference resistance: EN 61000-6-2:2005 |
| Resolution: |
| Protection class: III |
| UL approval: + |
| Connection type: Round connector M12 x 1, 5-pin |
| Ambient storage temperature: -40 °C … +80 °C |
