Specification:
| Part Number | 1041030 |
| Aluminum (Al): | Ca. 0.45 |
| Tightening torque, max.: | 100 Nm |
| Installation type: | Flush |
| Copper (Cu): | Ca. 0.4 |
| Sensing range Sn: | 15 mm |
| Output current Ia: | ≤ 200 mA |
| Switching frequency: | 500 Hz |
| Temperature drift (of Sr): | ± 10 % |
| Output function: | NO |
| Assured sensing range Sa: | 12.15 mm |
| Hysteresis: | 3 % … 15 % |
| Thread size: | M30 x 1.5 |
| Housing length: | 71 mm |
| F: | 120 mm |
| Power consumption: | ≤ 10 mA |
| Repeatability: | ≤ 2 % |
| Brass (Br): | Ca. 0.4 |
| Power-up pulse protection: | + |
| Electrical wiring: | DC 3-wire |
| Ambient operating temperature: | -25 °C … 75 °C |
| Housing: | Standard |
| Enclosure rating: | IP 67 |
| Supply voltage: | 10 V DC … 30 V DC |
| EMC: | According to EN 60947-5-2 |
| Short-circuit protection: | + |
| D: | 45 mm |
| Ripple: | ≤ 10 % |
| Stainless steel (V2A, 304): | Ca. 0.8 |
| Time delay before availability: | ≤ 125 ms |
| Housing material: | Metal, Nickel-plated brass |
| Remark: | Associated graphic see «Installation» |
| Reverse polarity protection: | + |
| Shock/vibration: | 30 g, 11 ms/10 Hz … 55 Hz, 1 mm |
| Carbon steel St37 (Fe): | 1 |
| B: | 60 mm |
| Switching output: | PNP |
| C: | 30 mm |
| Voltage drop: | ≤ 2 V |
| Thread length: | 54 mm |
| Note: | The values are reference values which may vary |
| Connection type: | Connector M12, 4-pin |
| Design: | Cylindrical |
| Housing cap material: | Plastic, PA6 |
This product is a sensor with part number 1041030. Its housing is made of nickel-plated brass and has a cylindrical design. The sensing range (Sn) is 15 mm, with an assured sensing range (Sa) of 12.15 mm. The sensor operates with a supply voltage of 10 V DC to 30 V DC and has an output current (Ia) of ≤ 200 mA. The switching frequency is 500 Hz, and the output function is NO (Normally Open) with a PNP switching output.
It features a standard housing with a thread size of M30 x 1.5 and a thread length of 54 mm. The housing length is 71 mm. The installation type is flush. The sensor is protected against short circuits and reverse polarity, and it includes a power-up pulse protection. The enclosure rating is IP 67.
The sensor operates within an ambient temperature range of -25 °C to 75 °C. It has a voltage drop of ≤ 2 V and a ripple of ≤ 10%. Repeatability is ≤ 2%, and hysteresis ranges from 3% to 15%. The time delay before availability is ≤ 125 ms. The connection type is a M12 connector with 4 pins. The housing cap material is Plastic, PA6.
Material composition includes Aluminum (Al) at approx. 0.45%, Copper (Cu) at approx. 0.4%, and Brass (Br) at approx. 0.4%. Stainless steel (V2A, 304) is approx. 0.8%, and Carbon steel St37 (Fe) is 1. The tightening torque, max. is 100 Nm. The sensor is compliant with EMC regulations according to EN 60947-5-2. It is resistant to shock and vibration (30 g, 11 Hz — 55 Hz, 1 mm). The electrical wiring is DC 3-wire.
The power consumption is ≤ 10 mA. The dimensions are B: 60 mm, C: 30 mm, D: 45 mm, and F: 120 mm. A note indicates that the values are reference values which may vary. An associated graphic can be found under «Installation».
