Specification:
| Part Number | 6052239 |
| Maximum flow: | 240 l/min |
| Accuracy of sensor element: | 1 % (of reading +/- 3 mm/s (with calibration report)) |
| Minimum flow: | 5 l/min |
| Inlet zone: | 60 cm |
| Upper signal level: | 20 mA … 20.5 mA |
| Ripple: | ≤ 5 Vpp |
| Housing material: | PSU |
| Conductivity: | No limitation |
| Medium: | Fluids |
| Initialization time: | ≤ 5 s |
| Wetted parts: | PSU |
| Capacitive load: | 100 nF |
| Ambient storage temperature: | -20 °C … +70 °C |
| Lower signal level: | 3.8 mA … 4 mA |
| Supply voltage: | 18 V DC … 30 V DC |
| Connection type: | Round connector M12 x 1, 8-pin |
| Response time: | Filter off 100 ms, filter low 300 ms, filter medium 1 s, filter strong 4.2 s |
| Process temperature: | 0 °C … +80 °C |
| Nominal width measuring tube: | NW 25 |
| Signal voltage HIGH: | Vs — 2 V |
| Repeatability: | ≤ 0.5 % |
| Ambient temperature operation: | 0 °C … +60 °C |
| Outlet zone: | 10 cm |
| Process pressure: | Max. 10 bar |
| Inductive load: | 1 H |
| Output signal: | Analog output: 4 mA … 20 mA, 0 mA … 20 mA current flow and temperature 2 pulse/status output: transistor output for flow rate meter, empty pipe detection, flow monitoring 1 digital input for dosing and counter reset |
| Output current: | < 100 mA |
| Power consumption: | ≤ 180 mA |
| Impuls/frequency output: | 0 kHz … 10 kHz |
| Output load: | < 500 Ohm |
| Process connection: | G 1 ¼ |
| Signal voltage LOW: | ≤ 2 V |
| Enclosure rating: | IP 67 |
| Protection class: | III |
| Resolution: | 0.03 l/min |
| Puls width: | ≤ 1 s |
| Weight: | 460 g |
