Sick DL100-22HA2213
Datasheet:
- Article: 1096496
- Supply voltage UV: DC. current 18 V … 30 V, Limit values
- Residual ripple: 5 Vss
- Initialization time: Typ. 1.5 s
- Housing material: Metal (Aluminium casting)
- Front window material: Plastic (PMMA)
- Connection type: Connector, M12
- Indication: 6-digit dot matrix display 5 x 7, LEDs
- Weight: Approx. 800 g (with mounting: 1600 g)
- Current consumption: At 24 V DC
- Dimensions (W x H x D): 69.4 mm x 82.5 mm x 100.2 mm
- Modulation frequency: Fixed
- Protection type: IP65
- Protection class: III
- Measurement range: 0.15 m … 200 m, on Diamond Grade reflective film
- Measurement object: Reflector
- Resolution: 0.1 mm, 0.125 mm, 1 mm, 10 mm, 100 mm , freely adjustable
- Reproduction accuracy: 1 mm
- Accuracy: ± 2.5 mm
- Evaluation: 2 ms
- Measurement cycle time : 1 ms
- Output Time: 1 ms
- RADIATION SOURCE: Laser, Red, Visible Red
- Laser Class: 2, Complies with 21 CFR 1040.10 and 1040.11 , excluding differences according to “Laser Notice No. 50” of June 24, 2007 (IEC 60825-1:2014, EN 60825-1:2014)
- Typ. light spot size (distance): 5 mm + (2 mm x distance in m)
- Max. travel speed: 15 m/s
- Acceleration (max.): ? 15 m/sІ
- Heating: ?
- PROFINET: ?
- SSI: ?
- Multi-function input (MF): 1 x MF1
- Electromagnetic compatibility (EMC): EN 61000-6-2, EN 61000-6-4
- Operating temperature range: –40 °C … +55 °C, Operation with heater, –40 °C … +75 °C, Operation with cooling housing,
- Temperature range during storage: –40 °C … +75 °C
- Influence of air pressure: 0.3 ppm/hPa
- Influence of temperature: 1 ppm/K
- li>Temperature drift: Typ. 0.1 mm/K
- Typ. Immunity to extraneous light: ? 100.000 lx
- Mechanical strength: Impact: (EN 600 68-2-27), Sine: (EN 600 68-2-6), Noise: (EN 600 68-2 -64),
- Quantity: 2
- Type: Push-pull mode: PNP/NPN
- Function: Distance: switching output for distance
- : Speed: output for speed
- : Maintenance: warning messages about laser aging, when the attenuation value does not reach the required value (for example, when dirty, when the permissible internal temperature of the device is exceeded or under-reached, when the plausibility of the measured value is incorrect, if the laser is not ready for operation, when heating is turned on
- : Laser off
- : Preset
- Maximum output current IA: ? 100 mA
- Category:Long range distance sensors
- Series:Dx100 li>
The device is a Sick DL100-22HA2213. It operates with a supply voltage of 18 V to 30 V DC, with a residual ripple of 5 Vss. The initialization time is typically 1.5 s. The housing is constructed from metal (aluminium casting), and the front window is made of plastic (PMMA).
The connection type is an M12 connector. The device features a 6-digit dot matrix display (5 x 7) with LEDs. It weighs approximately 800 g, or 1600 g with mounting. Current consumption is measured at 24 V DC. Dimensions are 69.4 mm x 82.5 mm x 100.2 mm (W x H x D). The modulation frequency is fixed.
Protection is rated IP65, and the protection class is III. The measurement range is 0.15 m to 200 m when used with Diamond Grade reflective film, targeting a reflector as the measurement object. Resolution options are 0.1 mm, 0.125 mm, 1 mm, 10 mm, 100 mm, and are freely adjustable. Reproduction accuracy is 1 mm, with an overall accuracy of ± 2.5 mm.
Evaluation time is 2 ms, measurement cycle time is 1 ms, and output time is 1 ms. The radiation source is a red visible laser, classified as Class 2, compliant with 21 CFR 1040.10 and 1040.11 (excluding differences per “Laser Notice No. 50”). Typical light spot size is 5 mm + (2 mm x distance in m). Maximum travel speed is 15 m/s, and maximum acceleration is ? 15 m/sІ. The device supports heating, PROFINET, and SSI interfaces. It has 1 multifunction input (MF1).
Electromagnetic compatibility meets EN 61000-6-2 and EN 61000-6-4 standards. Operating temperature range is –40 °C to +55 °C with heater, and –40 °C to +75 °C with cooling housing. Storage temperature range is –40 °C to +75 °C. Influence of air pressure is 0.3 ppm/hPa, and influence of temperature is 1 ppm/K. Temperature drift is typically 0.1 mm/K. Immunity to extraneous light is ? 100,000 lx.
Mechanical strength is tested for impact (EN 600 68-2-27), sine (EN 600 68-2-6), and noise (EN 600 68-2-64). Quantity is 2. Output type is push-pull mode PNP/NPN. Functions include switching output for distance, output for speed, and maintenance warnings (e.g., laser aging, dirt, temperature issues, measurement plausibility, laser readiness, heating status), laser off, and preset. Maximum output current IA is ? 100 mA. The category is Long range distance sensors, and the series is Dx100.
The connection type is an M12 connector. The device features a 6-digit dot matrix display (5 x 7) with LEDs. It weighs approximately 800 g, or 1600 g with mounting. Current consumption is measured at 24 V DC. Dimensions are 69.4 mm x 82.5 mm x 100.2 mm (W x H x D). The modulation frequency is fixed.
Protection is rated IP65, and the protection class is III. The measurement range is 0.15 m to 200 m when used with Diamond Grade reflective film, targeting a reflector as the measurement object. Resolution options are 0.1 mm, 0.125 mm, 1 mm, 10 mm, 100 mm, and are freely adjustable. Reproduction accuracy is 1 mm, with an overall accuracy of ± 2.5 mm.
Evaluation time is 2 ms, measurement cycle time is 1 ms, and output time is 1 ms. The radiation source is a red visible laser, classified as Class 2, compliant with 21 CFR 1040.10 and 1040.11 (excluding differences per “Laser Notice No. 50”). Typical light spot size is 5 mm + (2 mm x distance in m). Maximum travel speed is 15 m/s, and maximum acceleration is ? 15 m/sІ. The device supports heating, PROFINET, and SSI interfaces. It has 1 multifunction input (MF1).
Electromagnetic compatibility meets EN 61000-6-2 and EN 61000-6-4 standards. Operating temperature range is –40 °C to +55 °C with heater, and –40 °C to +75 °C with cooling housing. Storage temperature range is –40 °C to +75 °C. Influence of air pressure is 0.3 ppm/hPa, and influence of temperature is 1 ppm/K. Temperature drift is typically 0.1 mm/K. Immunity to extraneous light is ? 100,000 lx.
Mechanical strength is tested for impact (EN 600 68-2-27), sine (EN 600 68-2-6), and noise (EN 600 68-2-64). Quantity is 2. Output type is push-pull mode PNP/NPN. Functions include switching output for distance, output for speed, and maintenance warnings (e.g., laser aging, dirt, temperature issues, measurement plausibility, laser readiness, heating status), laser off, and preset. Maximum output current IA is ? 100 mA. The category is Long range distance sensors, and the series is Dx100.
