Specification:
| Part Number | 1037982 |
| Mechanical interface: | Solid shaft, Servo flange |
| Resistance to shocks: | 70 g (according to EN 60068-2-27) |
| Storage temperature range: | -40 °C … +100 °C, without package |
| Maximum operating speed: | 10,000 /min |
| Load current max.: | 30 mA |
| Shaft diameter: | 6 mm x 10 mm |
| Resistance to vibration: | 30 g, 10 Hz … 2,000 Hz (according to EN 60068-2-6) |
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side |
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) |
| Moment of inertia of the rotor: | 6.2 gcm? |
| Reference signal, position: | 90 °, electronically, gated with A and B |
| Connection type: | Connector M23, 12-pin, radial |
| Error limits: | ± 0.05 ° |
| MTTFd: mean time to dangerous failure: | 300 a (EN ISO 13849-1) |
| Bearing lifetime: | 3.6 x 10^10 revolutions |
| Mass: | 0.3 kg |
| Start up torque: | 0.5 Ncm (+20 °C) |
| Initialization time: | 40 ms |
| Power consumption: | 0.5 W (without load) |
| Max. angular acceleration: | 500,000 rad/s? |
| Pulses per revolution: | 50 |
| Reference signal, number: | 1 |
| Permissible shaft loading radial/axial: | 40 N (axial), 80 N (radial) |
| Operating voltage range: | 10 V … 32 V |
| Measuring step deviation: | ± 0.08 ° |
| Electrical interface: | 10 V … 32 V, HTL/Push pull, Connector M23, 12-pin, radial |
| Working temperature range: | -30 °C … +100 °C |
| Maximum output frequency: | 600 kHz |
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) |
| Operating torque: | 0.3 Ncm (+20 °C) |
| Measuring step: | 90 ° / electronically/number of lines |
Buy Sick DFS60B-S1EA00050 with the best possible price and delivery terms on eltra-trade.com
Eltra Trade s.r.o. provides comprehensive industrial automation solutions. With a wide selection of products and efficient delivery options, we meet your needs effectively. Our focus on quality and customer satisfaction distinguishes us. Experience our exceptional service and support for your automation needs.
