Specification:
| Part Number: 1036761 |
| Start up torque: 0.5 Ncm (+20 °C) |
| Maximum operating speed: 10,000 /min |
| Shaft diameter: 6 mm x 10 mm |
| Connection type: Male connector M12, 8-pin, radial |
| Reference signal, number: 1 |
| Resistance to shocks: 60 g (according to EN 60068-2-27) |
| Enclosure rating: IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side |
| Operating voltage range: 4.5 V … 32 V |
| Working temperature range: -30 °C … +100 °C |
| Power consumption: 0.7 W (without load) |
| Operating torque: 0.3 Ncm (+20 °C) |
| Measuring step: 90 ° / electronically/number of lines |
| Permissible relative humidity: 90 % (condensation of the optical scanning not permitted) |
| Resistance to vibration: 20 g, 10 Hz … 2,000 Hz (according to EN 60068-2-6) |
| Mass: 0.3 kg |
| Load current max.: 30 mA |
| EMC: (according to EN 61000-6-2 and EN 61000-6-3) |
| Max. angular acceleration: 500,000 rad/s? |
| Reference signal, position: 90 °, electronically, gated with A and B |
| MTTFd: mean time to dangerous failure: 300 a (EN ISO 13849-1) |
| Pulses per revolution: 65,536 |
| Electrical interface: 4.5 V … 32 V, TTL/HTL programmable, Connector M12, 8-pin, radial |
| Bearing lifetime: 3.6 x 10^10 revolutions |
| Mechanical interface: Solid shaft, Servo flange |
| Maximum output frequency: 820 kHz |
| Error limits: ± 0.03 ° |
| Permissible shaft loading radial/axial: 40 N (axial), 80 N (radial) |
| Storage temperature range: -40 °C … +100 °C, without package |
| Initialization time: 30 ms, 32 ms |
| Moment of inertia of the rotor: 6.2 gcm? |
