Sick C4C-SA18030A10000
Datasheet:
Item No.: 1211509
Application Area: Standard Industrial Environment
System Part: Transmitter
Compatible Receiver: 1211510
Resolution: 30 mm
Scanning range: 15 m
Protective field height: 1,800 mm
No blind spots: Yes
Synchronization: Optical synchronization
Supply set: Transmitter
Type: Type 4 (IEC 61496-1)
Reliability class: SIL3 (IEC 61508), SILCL3 (IEC 62061)
Category: Category 4 (ISO 13849-1)
Performance level: PL e (ISO 13849-1)
PFHd (average probability of dangerous failure per hour): 3.7 x 10-9
TM (targeted operating time): 20 years (ISO 13849-1)
Safe state in case of error: At least one OSSD output is in AUS state (OFF).
Protected operation: ?
Automatic detection of protective field width: ?
System connection: M12 connector, 5-pin
Indication elements: LEDs
Protection class: III (IEC 61140)
Supply voltage UV: 24 V DC (19.2 V … 28.8 V)
Residual ripple: ? 10%
Power consumption, typical: 1.3 W (DC)
Dimensions: cm Dimensional drawing
Housing material: Extruded aluminum profile
Protection type: IP65 (IEC 60529), IP67 (IEC 60529)
Operating temperature range: – 30 °C … +55 °C
Storage temperature: –30 °C … +70 °C
Air humidity: 15% … 95%, without condensation
Vibration resistance: 5 g, 10 Hz … 55 Hz (IEC 60068-2-6)
Shock resistance: 10 g, 16 ms (IEC 60068-2-27)
Wavelength: 850 nm
Emission type: Near infrared (NIR), invisible
Integration via Flexi Soft safety controller: CANopen
- : DeviceNet
- : EtherCAT®
- : EtherNet/IP
- : Modbus TCP
- : PROFIBUS DP
- : PROFINET
Fixed installation: > 12 wire diameters
Movable: > 15 wire diameters
Scanning range: 15 m
Category: Safety light curtains
Series: deTec







