Specification:
| Part Number | 1060985 |
| Mounted mechanic: | MRA-F130-105D2 |
| Measuring range: | 0 m … 5 m |
| Resistance to vibration: | 30 g, 10 Hz … 2,000 Hz (according to EN 60068-2-6) |
| Electrical interface: | PROFIBUS |
| Part number mechanic: | 6028626 |
| Operating speed: | 4 m/s |
| Relative humidity / Condensation: | 95 % (A3M60, condensation of the optical scanning not permitted), 98 % (ATM60 PROFIBUS, condensation of the optical scanning not permitted) |
| Initialization time: | Ca. 1 s, A3M60, Ca. 12 s, ATM60 PROFIBUS |
| Linearity: | ≤ ± 2 mm |
| Housing material, wire draw mechanism: | Aluminum (anodised), plastic |
| Connection type: | Connector 3 x M12, 5-pin, axial |
| Number of steps per revolution: | 8,192 |
| Power consumption: | 1.5 W (A3M60), 2 W (ATM60 PROFIBUS) |
| Encoder profile: | Encoder profile version 1.1 class 1 and class 2 (A3M60), Profil für Encoder (07hex) — Class 2 (ATM60 PROFIBUS) |
| Address setting: | 0 … 127, DIP switch |
| Enclosure rating mechanic: | IP 64 |
| Measuring wire diameter: | 1.35 mm |
| Resolution (wire draw + encoder): | 0.04 mm |
| Mass (mechanics): | 2.8 kg |
| Working temperature range (combination): | Wird definiert durch den höheren mininalen und niedrigeren maximalen Wert des Arbeitstemperaturbereichs von Encoder und Mechanik |
| Length of wire pulled out per revolution: | 334.1 mm |
| Measuring wire material: | Highly flexible stranded steel 1.4401 stainless steel V4A |
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) |
| Part number encoder: | 1051018 |
| Working temperature range (mechanics): | -30 °C … +70 °C |
| Protocol: | PROFIBUS DP V0 (A3M60), Profil für Encoder (07hex) — Class 2 (ATM60 PROFIBUS) |
| Supply voltage: | 10 V … 32 V |
| Actual length of cable extension: | 5.2 m |
| Mounted encoder: | A3M60, ATM60 PROFIBUS |
| Hysteresis: | ≤ 2 mm |
| Bus termination: | Via DIP switches |
| Resistance to shocks: | 100 g, 6 ms (according to EN 60068-2-27) |
| Enclosure rating encoder: | IP 67 |
| Working temperature range (encoder): | -10 °C … +70 °C, A3M60, -20 °C … +70 °C, ATM60 PROFIBUS |
| Mass (measuring wire): | 7.1 g/m |
| Wire acceleration: | 70 m/s² |
| Spring return force: | 15 N … 20 N |
| MTTFd: mean time to dangerous failure: | 150 a (ATM60 PROFIBUS), 60 a (A3M60) |
| Repeatability: | ≤ 1 mm |
| Encoder: | Absolute encoders |
| SET (electronic adjustment): | Via PRESET push button or protocol |
| Mass (including encoder): | 3.08 kg (A3M60), 3.39 kg (A3M60) |
| Life of wire draw mechanism: | 1 million cycles |
