Specification:
| Part Number: 1061004 |
| Mass (including encoder): 6.4 kg |
| Working temperature range (combination): Defined by the higher minimum and lower maximum value of the operating temperature range of the encoder and mechanics |
| SET (electronic adjustment): Via PRESET push button or protocol |
| Connection type: Connector 3 x M12, 4-pin, axial |
| Spring return force: 10 N … 20 N |
| Mass (measuring wire): 2.6 g/m |
| Linearity: ≤ ± 2 mm |
| Mounted encoder: AFM60 PROFINET |
| Address setting: Via DCP |
| Encoder: Absolute encoders |
| Part number encoder: 1059040 |
| Enclosure rating mechanic: IP 64 |
| Number of steps per revolution: 262,144 |
| Repeatability: ≤ 2 mm |
| Resistance to vibration: 30 g, 10 Hz … 2,000 Hz (according to EN 60068-2-6) |
| Initialization time: Ca. 12 s |
| Working temperature range (mechanics): -30 °C … +70 °C |
| Mass (mechanics): 6.2 kg |
| Mounted mechanic: MRA-F130-130D1 |
| MTTFd: mean time to dangerous failure: 80 a |
| Life of wire draw mechanism: 1 million cycles |
| Enclosure rating encoder: IP 67 |
| Part number mechanic: 6028629 |
| Measuring wire material: Highly flexible stranded steel 1.4401 stainless steel V4A |
| Wire acceleration: 15 m/s² |
| Length of wire pulled out per revolution: 332.4 mm |
| Hysteresis: ≤ 5 mm |
| Measuring range: 0 m … 30 m |
| Supply voltage: 10 V … 30 V |
| Resolution (wire draw + encoder): 0.001 mm |
| Measuring wire diameter: 0.81 mm |
| Power consumption: 3 W |
| Encoder profile: V4.1 class3 |
| EMC: (according to EN 61000-6-2 and EN 61000-6-3) |
| Working temperature range (encoder): -30 °C … +70 °C |
| Electrical interface: PROFINET |
| Relative humidity / Condensation: 90 % (condensation of the optical scanning not permitted) |
| Housing material, wire draw mechanism: Aluminum (anodised), plastic |
| Actual length of cable extension: 30.2 m |
| Operating speed: 4 m/s |
| Protocol: PROFINET IO/ RT Class B |
