⟧W7⟧
Specification:
⟧W8⟧⟧W9⟧⟧W10⟧Part Number
⟧W11⟧⟧W12⟧1031580
⟧W13⟧⟧W14⟧⟧W15⟧⟧W16⟧Moment of inertia of the rotor:
⟧W17⟧⟧W18⟧54 gcm?
⟧W19⟧⟧W20⟧⟧W21⟧⟧W22⟧Bearing lifetime:
⟧W23⟧⟧W24⟧3.6 x 10^9 revolutions
⟧W25⟧⟧W26⟧⟧W27⟧⟧W28⟧Maximum operating speed:
⟧W29⟧⟧W30⟧10,000 /min (without shaft seal)
⟧W1⟧6,000 /min (with shaft seal)
⟧W31⟧⟧W32⟧⟧W33⟧⟧W34⟧Permissible relative humidity:
⟧W35⟧⟧W36⟧90 % (condensation of the optical scanning not permitted)
⟧W37⟧⟧W38⟧⟧W39⟧⟧W40⟧Storage temperature range:
⟧W41⟧⟧W42⟧-40 °C … 100 °C
⟧W43⟧⟧W44⟧⟧W45⟧⟧W46⟧Error limits:
⟧W47⟧⟧W48⟧0.035 ° (binary number of steps)
⟧W2⟧0.046 ° (non-binary number of steps)
⟧W49⟧⟧W50⟧⟧W51⟧⟧W52⟧Operating voltage range:
⟧W53⟧⟧W54⟧10 V DC … 32 V DC
⟧W55⟧⟧W56⟧⟧W57⟧⟧W58⟧Mechanical interface:
⟧W59⟧⟧W60⟧Solid shaft, Face mount flange
⟧W61⟧⟧W62⟧⟧W63⟧⟧W64⟧Enclosure rating:
⟧W65⟧⟧W66⟧IP 65, according to IEC 60529, with mating connector fitted
⟧W3⟧⟧W4⟧⟧W67⟧⟧W68⟧⟧W69⟧⟧W70⟧Working temperature range:
⟧W71⟧⟧W72⟧-20 °C … 85 °C
⟧W73⟧⟧W74⟧⟧W75⟧⟧W76⟧Measuring step:
⟧W77⟧⟧W78⟧360 ° /number of lines
⟧W79⟧⟧W80⟧⟧W81⟧⟧W82⟧Resolution power:
⟧W83⟧⟧W84⟧1,024 x 1
⟧W85⟧⟧W86⟧⟧W87⟧⟧W88⟧Start up torque:
⟧W89⟧⟧W90⟧0.4 Ncm
⟧W91⟧⟧W92⟧⟧W93⟧⟧W94⟧Operating power consumption (no load):
⟧W95⟧⟧W96⟧90 mA
⟧W97⟧⟧W98⟧⟧W99⟧⟧W100⟧Resistance to shocks:
⟧W101⟧⟧W102⟧50 g (according to EN 60068-2-27)
⟧W103⟧⟧W104⟧⟧W105⟧⟧W106⟧Resistance to vibration:
⟧W107⟧⟧W108⟧20 g, 10 Hz … 2,000 Hz (according to EN 60068-2-6)
⟧W109⟧⟧W110⟧⟧W111⟧⟧W112⟧Max. angular acceleration:
⟧W113⟧⟧W114⟧500,000 rad/s?
⟧W115⟧⟧W116⟧⟧W117⟧⟧W118⟧EMC:
⟧W119⟧⟧W120⟧According to EN 61000-6-2 and EN 61000-6-3
⟧W121⟧⟧W122⟧⟧W123⟧⟧W124⟧Permissible Load capacity of shaft:
⟧W125⟧⟧W126⟧20 N (radial)
⟧W5⟧10 N (axial)
⟧W127⟧⟧W128⟧⟧W129⟧⟧W130⟧Electrical interface:
⟧W131⟧⟧W132⟧Connector M23, 21-pin, axial
⟧W133⟧⟧W134⟧⟧W135⟧⟧W136⟧Shaft diameter:
⟧W137⟧⟧W138⟧10 mm
⟧W139⟧⟧W140⟧⟧W141⟧⟧W142⟧Max. number of revolutions:
⟧W143⟧⟧W144⟧1
⟧W145⟧⟧W146⟧⟧W147⟧⟧W148⟧Initialization time:
⟧W149⟧⟧W150⟧80 ms
⟧W151⟧⟧W152⟧⟧W153⟧⟧W154⟧Max. number of steps per revolution:
⟧W155⟧⟧W156⟧1,024
⟧W157⟧⟧W158⟧⟧W159⟧⟧W160⟧Repeat accuracy:
⟧W161⟧⟧W162⟧0.005 °
⟧W163⟧⟧W164⟧⟧W165⟧⟧W166⟧Operating torque:
⟧W167⟧⟧W168⟧0.3 Ncm
⟧W169⟧⟧W170⟧⟧W171⟧⟧W172⟧Measuring step deviation:
⟧W173⟧⟧W174⟧0.005 °, 0.016 °
⟧W175⟧⟧W176⟧⟧W177⟧⟧W178⟧Operation of zero-set:
⟧W179⟧⟧W180⟧≥ 100 ms
⟧W181⟧⟧W182⟧⟧W183⟧⟧W184⟧Mass:
⟧W185⟧⟧W186⟧0.3 kg
⟧W187⟧⟧W188⟧⟧W189⟧
⟧W6⟧
⟧W190⟧
