| 11172632 | |
| Sensor | Sony IMX183 |
| Color | Color |
| Sensor type | 1″ CMOS |
| Shutter type | Rolling shutter Global reset shutter |
| Resolution | 5472 x 3648 px |
| Pixel size | 2.4 x 2.4 µm |
| Exposure time | 0.053 … 60000 ms |
| Dark noise | 3.17 e- |
| Saturation capacity | 14532 e- |
| Dynamic range | 71.5 dB |
| Signal-to-noise ratio | 41.6 dB |
| Quantum efficiency | 61.6 % @ 465 nm 67.8 % @ 536 nm 51.2 % @ 631 nm |
| Image formats, interface frame rate max. | Full Frame, 5472 x 3648 px, max. 15 fps |
| Image formats, aquisition frame rate max. (Burst Mode) | Full Frame, 5472 x 3648 px, max. 20 fps |
| Pixel formats | BayerRG8 BayerRG10 BayerRG12 BayerRG12 Packed Mono8 Mono10 Mono12 Mono12 Packed RGB8 BGR8 |
| Analog controls | Gain (0 … 20 dB) Offset (0 … 255 LSB 12 Bit) |
| Color models | Mono Raw BayerRGB BGR |
| Basic Functions | Exposure Gain / Color Gain Trigger / Exposure Active (Flash) Binning 2×2 Partial Scan Offset Free Running Mode (Live Image) |
| Auto Functions | Exposure Auto Gain Auto White Balance Auto Color Transformation Auto |
| Image Pre-processing | Image Flipping (X/Y) Color Processing (RGB, BGR, Mono) Color Enhancement (with optimized ColorTransformationMatrix) LUT / Gamma |
| Acquisition / Interface | Burst Mode Adjustable Framerate Device Link Throughput Limit Internal Image Buffer |
| Synchronization | free running trigger |
| Trigger sources | Hardware Software |
| Trigger delay | 0 … 2 sec, tracking and buffering of up to 256 trigger signals |
| Process Synchronization | Events Timer Trigger Delay Debouncer Counter Trigger via Action CMD (GigE) Additional Output Modes (e.g. Trigger Ready) Chunk data inside transferred image Encoder support via Counter End trigger source |
| Additional Functions | User Set Integrated temperature sensor Readable additional information (e.g. sensor information) Save Custom Data |
| Internal image buffer | 457 MB 8 images (Trigger Mode) 1 image (Free Running Mode) |
| Data interface | USB 3.0, Transfer Rate 5000 Mbits/sec, Connector: USB 3.0 Micro B |
| Process interface | M8 / 8 pins (SACC-DSI-M8MS-8CON-M8-L180) |
| Power supply | via USB 3.0 interface |
| Lens mount | C-mount |
| Width | 29 mm |
| Height | 29 mm |
| Depth | 38 mm |
| Weight | ≈ 90 g |
| Material | zinc die casting, baked varnish (until 02-2020 nickel-chrome-plated), IP 40 |
| Power consumption | approx. 3,3 W @ 15 fps |
| Operating voltage | 5 VDC (via USB3.0 interface) |
| Flash memory size | 128 kB |
| Operating temperature | 0 … +65 ° @ T = measurement point |
| Humidity | 10 … 90 % (non-condensing) |
| Protection class | IP 40 |
| Lines | 1 input line 1 output line 2 general purpose lines |
| Conformity | CE RoHS CE (R-41207004) |
This device features USB 3.0 connectivity and a 20.0 Megapixel resolution. The sensor is a Sony IMX183, a 1″ CMOS sensor with a color filter. It uses a rolling or global reset shutter.
The maximum resolution is 5472 x 3648 pixels with a pixel size of 2.4 x 2.4 µm. The exposure time ranges from 0.053 to 60000 ms. Key sensor characteristics include a dark noise of 3.17 e-, a saturation capacity of 14532 e-, a dynamic range of 71.5 dB, and a signal-to-noise ratio of 41.6 dB. Quantum efficiency figures are provided for specific wavelengths: 61.6 % @ 465 nm, 67.8 % @ 536 nm, and 51.2 % @ 631 nm.
Maximum frame rates are 15 fps at full frame (5472 x 3648 px) via the interface and 20 fps in burst mode. Supported pixel formats include various Bayer and Mono formats, as well as RGB8 and BGR8. Analog controls include gain (0-20 dB) and offset (0-255 LSB 12 Bit). Color models supported are Mono, Raw, BayerRGB, and BGR. Basic functions comprise exposure, gain, trigger control, binning, partial scan, offset, and free running mode. Auto functions include exposure, gain, white balance, and color transformation. Image pre-processing options include flipping, color processing, color enhancement, LUT, and gamma settings.
