Baumer ITD 70 A 4 Y 2

The ITD 70 A 4 Y 2 is an incremental encoder with an optical sensing method and a through hollow shaft, designed for precise position measurement. Its technical specifications are as follows:
Voltage Supply: 5 VDC ±5 % or 8…30 VDC. It includes reverse polarity protection. Power consumption without load is ≤100 mA.
Pulses per Revolution range from 1000 to 2500. The reference signal is a zero pulse with a 90° width. Output signals are A, B, N, plus their inverted versions. The encoder features TTL linedriver and HTL push-pull output stages, both with short-circuit proofing.
Maximum output frequency is ≤120 kHz. The device complies with interference immunity standard EN 61000-6-2 and emitted interference standard EN 61000-6-3.

• A, B, N + inverted
• TTL linedriver (short-circuit proof), HTL push-pull (short-circuit proof)
• EN 61000-6-2
• EN 61000-6-3

Mechanical Design:

• Flange Size: ø150 mm. Shaft Type: through hollow shaft, diameter ø38…65 mm. Mounting Kit: 051. Protection rating according to EN 60529: IP 54.
  Maximum operating speed: ≤4000 rpm. Material composition: Housing is made of bare aluminum, and the shaft is made of stainless steel.
  Operating temperature range: -20 to +70 °C. Relative humidity: 90 % non-condensing. Resistance to vibration (EN 60068-2-6): 10 g at 55-2000 Hz. Resistance to shock (EN 60068-2-27): 100 g at 11 ms.
  Connection is provided via a 1 m cable. Approximate weight: 2500 g.
• ø38…65 mm (through hollow shaft)
• 051
• IP 54
• ≤4000 rpm
• Housing: aluminium, bare; Shaft: stainless steel
• -20…+70 °C
• 90 % non-condensing
• EN 60068-2-6 Vibration 10 g, 55-2000 Hz; EN 60068-2-27 Shock 100 g, 11 ms
• Cable 1 m
• Approx. 2500 g

---