AZURA CM 2.1S, без проточных ячеек

Product Description Conductivity monitor with optional pH measurement Main unit for parallel conductivity and pH monitoring The AZURA CM 2.1S is a reliable conductivity monitor which is usually utilized in FPLC to follow salt gradients. By adding a pH sensor also pH values can be measured. The contactless measurements of conductivity reduces the risk of carryover to a minimum and makes the device easy to maintain. The fully biocompatible flow cells cover a flow rate of up to 100 ml/min. Choose between ADG30GC and ADG30GD for a CM 2.1S with ready to measure flow cells for either 10 or 100 ml/min maximum flow. Flow cell Flow cell type Contactless conductivity flow cell Biocompatible Yes Connection of flow cell Female 10-32 UNF or M8x1 thread (PEEK) both included in shipment Capillary connection 1/16 or 1/8 both included in shipment Wetted materials PEEK Detection Detector type Conductivity monitor Measurement accuracy Conductivity: &lt, 5% full scale value Temperature: &plusmn, 1.0C pH: &plusmn, 0.5 pH (within 4 25C) Measurement precision Conductivity: &lt, 2% of full scale value or &le, 5 mS/cm of higher values (measured within 0.1 300 mS/cm) pH: &plusmn, 0.2 pH (within 4 25C) Measurement range 0.1 999 mS/cm Linearity &plusmn,1% full scale value pH measurement 2 12 Maximum data rate 5 Hz Supported electrodes All pH electrodes with BNC connector and a voltage output of maximal &plusmn, 500 mV Communication Analog outputs 2 channels (conductivity and pH value not active if remote controlled by software) DAC 18 bit Digital outputs LAN, RS-232 Technical parameters GLP Electronic serial number Display LCD, 2 x 8 characters Ambient conditions Operating temperature: 4 40C, 39,2 104 F Relative humidity: below 90 %, non condensing General Power supply 100 240 V, 50 60 Hz, max. 20 W Dimensions 121 x 129 x 187 mm (W x H x D) Weight 3.2 kg

Технические характеристики