Redesigned to provide even more versatility and safety. Built upon standard-setting performance, including high speed, low heat output, imbalance tolerance and low noise, the J-26S XP»s vast range of separations only continues to grow. Above and beyond its BioSafety systems, this centrifuge has a more impact-resistant lid, full containment barrier and automatic rotor identification. Its ergonomic design—with lower instrument height and hands-free door operation—remains unchanged. The J-265 XP can process six liters of fermentor output in less than 10 minutes, deliver a subcellular fraction at 82,000 x g and run 24 microplates at a time. It automatically detects which rotor is installed and prevents the rotor from running above its maximum-rated speed, and enables quicker, quieter, more energy-efficient runs with better temperature control. The exclusive high-torque, switched reluctance (SR) drive shortens cycle times.
Технические характеристики
| Platform | Avanti |
| Maximum Speed | 26,000 rpm |
| Maximum g-Force | 81800 x g |
| BioSafe | Yes |
| Acceleration | Maximum or Slow |
| Deceleration | Maximum, slow, or off |
| Timed Run | 1 minute-3 hours, Continuous Hold |
| Max Capacity Volume Range | 1 — 6 L |
| Refrigeration System | Non-CFC, non-ozone depleting refrigerant |
| Temperature Range(s) | 10°C — 40°C in 1 degree increments |
| Rotor ID | Automatic |
| Zonal Capability | Yes |
| Pollution Degree | 2 |
| Environmental Conditions | -10°C to 40°C in 1° increments |
| Material(s) | Steel, Plastic |
| Finish | Powder Coat Paint |
| Weight | 290 kg(639.3 lb) |
| Width | 71 cm(28 in) |
| Depth | 86.0, 102.0 with air direviter extending cm(86.0, 102.0 with air direviter extending in) |
| Height | 86 cm (149 cm with door open) |
| Clearances | 7.6 cm (sides) & 16 cm (rear) |
| Humidity Restrictions | <, 95% (non-condensing) |
| Power Requirements | 230 VAC, 50 Hz |
