Поставка оптоэлектронных компонентов ведущих мировых производителей

Анализатор MembraPure uniTOC

Доставка импортных компонентов MembraPure по России от 3х недель транспортными компаниями СДЭК, Деловые Линии, Major Express.
Оплата физическими и юридическими лицами безналичным расчетом.
Цена может измениться после запроса у поставщика!

Product Description The uniTOC device uses the full oxidation by UV. The oxidation process can be enhanced with additional dosage of reagent (persulfate). By using the NDIR detector the uniTOC gives precise results in applications of ground water to ultrapure water. The NDIR detector is absolutely selective to carbon dioxide and therefore independent from conductivity and sample temperature. Measuring times are short and the continuous self-cleaning of the reactor avoids any cross-contamination. Since the quality of the stripped gas can be low, the use of pressurised air in combination with our air filters saves money and is optionally available. uniTOC Advantages NDIR detector / TOC is detected directly over CO2 and not via a 3rd parameter (conductivity), Therefore no limit to conductivity Available for two ranges of TOC 9 months UV lamp life guarantee / 50% longer life time range than usual #col-1057086888 > .col-inner { margin: 0px 0px -7px 0px, } 2 sample inlets / 2 points of the loop can be measured, so double efficiency Remote Service / Instrument can be connected to internet to get service diagnosis #col-1585703941 > .col-inner { margin: 0px 0px -9px 0px, } #image_1715155763 { width: 47%, } #col-1597840223 > .col-inner { margin: 0px 0px -29px 0px, } Calibration & System Suitability Test (SST) Calibration and SST of the uniTOC is easy and can be done by the user. Online operation is interrupted briefly for the system checks to be performed. The operator simply has to connect the inlet with the calibration standard solutions and the diluting water sample. The software enables the user to perform calibration and SST independently and the programmable sequence ensures the automatic procedure and data evaluation of the test. The verification of the TOC results according to the requirements of USP and Ph.Eur is realized by the periodic performance of system suitability tests. #image_535184932 { width: 90%, } #col-57640080 > .col-inner { margin: 0px 0px -21px 0px, } Options Pressure Regulator for Medium If the feed pressure is higher than 1.5 bar a pressure transducer is required Offline Version An offline configuration is available for the uniTOC Air Filtration Unit To use compressed air instead of oxygen or nitrogen Heat Exchanger Keeps the temperature below 50 C degrees Technical Specifications Method & detection: UV oxidation (full) & NDIR Sample Volume Flow: 20 mL (low range), 5 mL loop (high range) Total Organic Carbon (TOC) range: 2 to 5000 ppb (low range), 15 ppb to 20 ppm (high range) Related Norms: USP &lt,643&gt,, EP 2.2.44, DIN EN 1484, DIN 32645, 21 CFR part 11, IP 45 #col-853946633 > .col-inner { margin: 0px 0px -14px 0px, } #image_1207106109 { width: 55%, } Technical Specifications method & detection UV oxidation & NDIR (enhanced oxidation, configurable with reagent) sample volume 20 mL loop (low range), 5 mL loop (high range) period of measurement 6 to 15 min measurement range 2 to 5000 ppb (low range), 15 ppb to 20 ppm (high range) detection accuracy ~3 ppb or 2 % (whatever is greater) ports 2 for samples | 1 for reagent related norms USP &lt,643&gt,, DIN 32645, EP 2.2.44, DIN EN 1484, CFR 21 part 11, IP 45 ambient parameters relative humidity: 10 to 95 %, temperature: 10 to 45 C interface ports analog (4 20 mA) dimensions, weight, power 400 x 300 x 600 mm, 24 kg, 110 230 V, 50 Hz, 70 to 105 Watt Medium Requirements type of sample medium from ground water to ultra pure water sample temperature 10 to 50 C inlet pressure &lt, 1.5 bar compressed gas air, oxygen, nitrogen | free of carbon dioxide inlet pressure of gas nitrogen: 1 to 1.5 bar | oxygen: 3.5 to 5 bar View the Brochure

Технические характеристики

Technical Specifications

  • Method & detection:

UV oxidation (full) & NDIR

  • Sample Volume Flow:

20 mL (low range), 5 mL loop (high range)

  • Total Organic Carbon (TOC) range:

2 to 5000 ppb (low range), 15 ppb to 20 ppm (high range)

  • Related Norms:

USP &lt,643&gt,, EP 2.2.44, DIN EN 1484,

DIN 32645, 21 CFR part 11, IP 45

#col-1523810061 > .col-inner { margin: 0px 0px -14px 0px, } #image_1936732835 { width: 55%, }

Technical Specifications
method & detectionUV oxidation & NDIR (enhanced oxidation, configurable with reagent)
sample volume20 mL loop (low range), 5 mL loop (high range)
period of measurement6 to 15 min
measurement range2 to 5000 ppb (low range), 15 ppb to 20 ppm (high range)
detection accuracy~3 ppb or 2 % (whatever is greater)
ports2 for samples | 1 for reagent
related normsUSP &lt,643&gt,, DIN 32645, EP 2.2.44, DIN EN 1484, CFR 21 part 11, IP 45
ambient parametersrelative humidity: 10 to 95 %, temperature: 10 to 45 °C
interface portsanalog (4 — 20 mA)
dimensions, weight, power400 x 300 x 600 mm, 24 kg, 110 — 230 V, 50 Hz, 70 to 105 Watt
Medium Requirements
type of sample mediumfrom ground water to ultra pure water
sample temperature10 to 50 °C
inlet pressure&lt, 1.5 bar
compressed gasair, oxygen, nitrogen | free of carbon dioxide
inlet pressure of gasnitrogen: 1 to 1.5 bar | oxygen: 3.5 to 5 bar
[/col] [/row] View the Brochure

Replacement Parts & Accessories

To view available parts for this instrument and instruments like it, click here.

Our parts and accessories inventory is constantly changing. Don’t see what you’re looking for? Give us a call, we’ll be happy to help.

Service

Service Agreements Silver Gold First Class Ship & Fix Economy Ship & Fix
Preventative Maintenance Visit1 Preventative Maintenance Visit per Year1 Preventative Maintenance Visit per Year
Parts Covered
Labor Covered
Unlimited Remote Tech Support
Depot Repair
Depot Preventative Maintenance

Reviews

#image_1611959843 { width: 27%, } #image_519451855 { width: 60%, }

GMI was a very professional business to work with. Shipping was quick and easy. Technical Support was quick to respond. I would highly recommend GMI for all your laboratory equipment needs.

#text-2283356292 { color: rgb(0,0,0), } #text-2283356292 > * { color: rgb(0,0,0), } #image_818315209 { width: 60%, } Top notch customer service and vast selection of inventory. Highly recommend. #text-1685468946 { color: rgb(0,0,0), } #text-1685468946 > * { color: rgb(0,0,0), } #image_919879981 { width: 60%, } Great costumer service, over delivered and got everything I needed ahead of time. #text-721804741 { color: rgb(0,0,0), } #text-721804741 > * { color: rgb(0,0,0), } #image_1801186586 { width: 60%, } Very professional transaction. Would definitely buy from GMI again. #text-561903134 { color: rgb(0,0,0), } #text-561903134 > * { color: rgb(0,0,0), } #image_425870286 { width: 60%, } GMI were very easy and nice to work with, they quickly got in touch with me regarding a specific piece of equipment and were able to secure several options for me to choose from, letting me get to my experiments with minimal turnaround time. #text-1558639440 { color: rgb(0,0,0), } #text-1558639440 > * { color: rgb(0,0,0), } #image_364145378 { width: 60%, } As a small business owner that depends on specific laboratory equipment to operate, GMI delivered on every front. #text-2836527419 { color: rgb(0,0,0), } #text-2836527419 > * { color: rgb(0,0,0), } #image_1075539909 { width: 60%, } We bought a Leitz 1512 microtome for our lab from this company and the product is great. Costumer service is fantastic. We are happy with our purchase and highly recommend GMI to everybody. #text-2857974267 { color: rgb(0,0,0), } #text-2857974267 > * { color: rgb(0,0,0), } #image_1400743066 { width: 60%, } A+ supplier. Very helpful and materials received new and ready for use right out of the box. #text-3982063585 { color: rgb(0,0,0), } #text-3982063585 > * { color: rgb(0,0,0), } #image_1308374190 { width: 60%, } Great experience purchasing equipment from GMI in the past and will certainly be going with them for potential future purchases! Quick responses, understood my needs and great prices! #text-678186799 { color: rgb(0,0,0), } #text-678186799 > * { color: rgb(0,0,0), } #image_910324481 { width: 60%, } I have bought several pieces of equipment from GMI. In each case, my experience was fantastic. The salesperson made sure that he understood my needs and offered alternatives. The equipment arrived quickly and in great condition. I will use GMI in the future. #text-1426853535 { color: rgb(0,0,0), } #text-1426853535 > * { color: rgb(0,0,0), } #image_310078084 { width: 60%, } They are experts in the field — I wouldn’t trust our business with any one else. #text-3514919459 { color: rgb(0,0,0), } #text-3514919459 > * { color: rgb(0,0,0), } #image_413704289 { width: 60%, } I have worked with GMI for the past 3 years for service contracts on laboratory instruments and we are very satisfied with the level of service we have received. I would recommend them to anyone who needs to use their services. #text-365953032 { color: rgb(0,0,0), } #text-365953032 > * { color: rgb(0,0,0), } Related products Quick View

TOC Analyzers

MembraPure miniTOC Analyzer

Call 1-800-745-2710