: The Pump Set is suitable for thin, flammable and highly inflammable liquids and hydrocarbons. Perfectly suited for withdrawing or transferring explosive media and solvents. • Optionally available with Ex — plug • Pump tube equipped with Lutz original hand wheel • Suitable for Drum emptying alternative fuels, oils, flammable liquids Features & Advantages • Optionally with electric or compressed air drive • No lubricants and therefore no contamination of the pumped medium by lubricants • Optimised Drum emptying with a remaining quantity of approx. 0.1 litres • No leakage if the pumping station is tilted or moved • Maximum product utilization with reduced drum cleaning and disposal rates • Approved according to ATEX directive 2014/34/EU, category 1/2 * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump.The max. delivery head also depends on the pump design, motor and fluid.The viscosity values are determined with oil.
Технические характеристики
CharacteristicsFluidalcohol, fuel oil, for diesel, for gasoline, oilOperationdieselPrimingsemi-submersibleTechnologyimpellerDomainindustrial, chemistry, for the petrochemical industry, for the automotive industry, for the printing industryApplicationstransfer, drum, drain, IBC, for containersMaterialstainless steelFluid specificationfor aggressive media, for hazardous fluids, for flammable fluidsProtection levelexplosion-proof, ATEXOther characteristicsradialFlow
Min.: 0 l/min (0 us gal/min)
Max.: 40 l/min (10.56688 us gal/min)
Pressure
6 bar (87.023 psi)
Power
500 W (0.68 hp)
