The Pump Set is suitable for thin, flammable and highly inflammable liquids. Perfectly suited for withdrawing or transferring explosive media. • Optionally available with Ex — plug • Pump tube equipped with Lutz original handwheel • Suitable for filling or transferring alternative fuels, oils, flammable liquids Features & Advantages • Optionally with electric or compressed air drive • No lubricants and therefore no contamination of the pumped medium by lubricants • Highly resistant noble carbon shaft bearing • Maintenance without special tools • Seal modules of the seal-less (DL) pump are interchangeable • Approved according to ATEX directive 2014/34/EU, category 1/2 * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump.The max. delivery head also depends on the pump design, motor and fluid.The viscosity values are determined with oil.
Технические характеристики
CharacteristicsFluidalcohol, diesel fuel, for gasoline, oilOperationpneumaticPrimingsemi-submersibleTechnologyimpellerDomainindustrial, chemistryApplicationstransfer, drum, drainMaterialstainless steelFluid specificationfor aggressive media, for hazardous fluids, for flammable fluidsProtection levelexplosion-proof, ATEXFlow
Min.: 0 l/min (0 us gal/min)
Max.: 124 l/min (32.75733 us gal/min)
Pressure
6 bar (87.023 psi)
Head
Min.: 0 m (000)
Max.: 35 m (11409)
Power
1,000 W (1.36 hp)
Fluid temperature
100 °C (212 °F)
Input diameter
41 mm (1.6 in)
