| Computer Interface Intermediate Language (CIIL) |
| Relay Control and DFI/RI |
Additional Features:
Output Ratings (Two 50W outputs)
- Low-range volts, amps 50W: 0 to 16 V, 0 to 200 mA
- High range volts, amps 50W: 0 to 50 V, 0 to 1 A or 0 to 16 V, 0 to 2 A
Accuracy at 25°C ±5°C (2 outputs)
- Voltage 50W: 0.016% + 3 mV (low), 10 mV (high)
- Current 50W: 0.04% + 185 µA (low), 500 µA (high)
Noise (20 Hz to 20 MHz) 2 output each
- Voltage RMS: 500 µV
- Peak-to-peak: 3 mV
- Current RMS: 0.1 mA
The Agilent HP 6628A is a precision, dual-output power supply that provides fast, low-noise outputs, dual-range, precision low current measurement, built-in measurements and advanced programmable features, and protection features to ensure DUT safety. The Agilent HP 6628A 50 Watt, dual-output is versatile and very useful on the R&D bench. This 3U high package can be controlled from either the front panel keypad or, for automated testing, from the GPIB.
Two, three, or four isolated outputs are integrated into one package, conserving rack space and GPIB addresses. Most of the outputs also provide dual ranges, for more current at lower voltage levels. The outputs can be connected in parallel or series to further increase the flexibility that these products offer the system designer.
Programming is done using industry standard SCPI commands. Test system integration can be further simplified by using the VXIplug&play drivers. These power supplies help reduce test time with fast up and down programming, enhanced by an active downprogrammer which can sink the full rated current.
Технические характеристики
| Manufacturer | Agilent, HP, Keysight |
|---|---|
| Condition | Used |
| Current | 1 A |
| Voltage | 50 V |
| Power | 50 W |
