Additional Features:
- Voltage: 50V
- Current: 0.2A
- Power: 10W
- Load Effect: 4 mV
- Source Effect: 4 mV
- PARD: 200 µA/1 mV
- Low Ripple and Noise
- Compact, Impact-resistant stackable case
- Short-circuit proof
- Dual function metering
- Coarse and fine output voltage controls
- Designed for Bench Use
The Agilent 6218A is a 50V, 0.2A DC Power Supply that is designed for general laboratory use and is equipped with front-panel mounted voltage controls, a combination volt/ammeter, and output binding posts. Output voltage is continuously variable, via coarse and fine controls from 0 V to 15% above the maximum rated output. A switch selects either output voltage or current for display on the panel meter.
Load connections are made via three binding posts. Either the + or the — post may be grounded through an adjacent GND terminal or the supply may be operated floating at up to 300 volts above ground.
The Constant Voltage/Constant Current Model has concentric coarse and fine current controls which allow setting the current-limit point to any value within the current rating. Using these controls, the CV/CC supplies can also be operated as constant current sources with 500 µA load regulation. All CV/CC models can be connected in series or parallel.
Технические характеристики
| Manufacturer | Agilent, HP, Keysight |
|---|---|
| Condition | Used |
| Current | 200 mA |
| Voltage | 50 V |
| Power | 10 W |
