Additional Features:
- Volts: 150V/ 300V/ Auto
- Current : 12A / 6A (150V / 300V)
- Power: 1500VA
- Frequency: 15 Hz–1000 Hz
- Compact size and weight attributable to advance PWM technology
- Built-in PFC, provide input power factor over 0.98 (full load)
- AC+DC output mode for voltage DC offset simulation
- Programmable slew rate setting for changing voltage and frequency
- Programmable voltage, current limit
- One-key recall for 9 different voltage and frequency
- Low output impedance for testing IEC 61000-3-2 ( 61605 )
- Comprehensive measurement capability, V, Irms, Ipk, Inrush, P, Q, S, PF, CF of current and etc.
- High output current crest factor, ideal for inrush current testing
- Turn on, turn off phase angle control
- TTL signal which indicates ON/OFF
- Analog programming interface
- 3 units combined to 3-phase power output
- Easy-use software for operation and ON/OFF test
- Optional GPIB and RS-232C interface
- Full protection: OP,OC,OV and OT protection
The Chroma 61603 uses modern PWM technology to provide a pure programmable AC signal with distortion less then 0.5%. The instrument provides both AC or DC or AC+DC modes to allow testing of the most complex devices. In addition to advanced readback functions the instrument include a power amplifier mode allowing of power replication of almost any wave shape. The Chroma 61603 is suitable for commercial, avionics, and military applications from bench-top testing to mass production.
The 61600 series generates very clean AC output with distortion less than 0.3% at 50/60Hz. With the state-of-the-art PWM technology and power factor correction circuit, the 61600 series yields higher efficiency and delivers more output power. The 61600 series is capable of delivering up to 6 times of peak current compared to its maximum rated current that makes it ideal for inrush current test.
Технические характеристики
| Manufacturer | Chroma |
|---|---|
| Condition | New |
| Amps | 16 A |
| Frequency | 1 kHz |
| Phase | 1 |
| Power (VA) | 1.5 kVA |
| Volts | 300 V |
