Additional Features:
- Maximum switch rates: 5500 channels/second from back-plane, 100000 channels/second from ribbon cable
- Up to six (eight with extender) high-speed FET multiplexers can be controlled through the ribbon cable
- The 24-channel multiplexers switch high and low only. Each floating input is balanced (equal impedance between high-to-chassis and low-to-chassis) to provide good common mode rejection
- FETs have no mechanical limitations, as there is no wearing out due to switching
- Maximum input voltage: Rear and back-plane input protected to 16 V peak. With analog back-plane disconnected from multiplexer, the back-plane voltage can go up to 42 V peak
- Maximum input current: 1 mA per channel
- Power on resistance: >,108 Ω
- Power off resistance with Vin 10 V: >,1000 Ω
- Power off resistance with Vin >,10 V: >,200 Ω
- Maximum capacitance at 1 MHz: 200 pF
- Closed channel path resistance: 3.1 kΩ
- Bandwidth: 1.0% flatness at 20 kHz, -3 dB bandwidth at 200 kHz
- Crosstalk: -50 dB at 10 kHz, -35 dB at 100 kHz
- Maximum offset voltage: 15 µV at 0 to 28° C, 185 µV at 28 to 55° C
- Maximum bias current
- Current sourced by High or Low to Chassis into Input Terminals or back-plane, with isolation relays closed: ±5 nA DC at 0 to 28° C, ±45 nA DC at 28 to 55° C
- Current sourced by High or Low to Chassis into back-plane, with isolation relays open: ±1 nA DC at 0 to 55° C
- Maximum wire size: 16 AWG
- Reference junction compensation accuracy: 0.1° C
- Maximum temperature difference across isothermal module: 0.2° C
The Agilent HP 44713A is a 24-channel high-speed FET multiplexer that directly multiplexes voltage, resistance, thermocouples, and strain gages. The Agilent HP 44713A maximizes measurement throughput and increases system reliability.
Технические характеристики
| Manufacturer | Agilent, HP, Keysight |
|---|---|
| Condition | Used |
