Technical Data
Fluke 117
Electrician’s Multimeter
with Non-Contact Voltage
Features include:
•
VoltAlert
™
technology for non-contact voltage detection
•
AutoVolt automatic ac/dc voltage selection
•
LoZ: helps prevent false readings due to ghost voltage
•
Large white LED backlight to work in poorly lit areas
•
True-rms for accurate measurements on non-linear loads
•
Measures 10 A (20 A overload for 30 seconds)
•
Resistance, continuity, frequency and capacitance
•
Min/Max/Average to record signal fluctuations
•
Compatible with optional magnetic hanger (ToolPak
™
) for
hands free operation
•
CAT III 600 V safety rated
Compact true-rms meter for
commercial applications
The Fluke 117 is the ideal meter for
demanding settings like commercial
buildings, hospitals and schools. The 117
includes integrated non-contact voltage
detection to help get the job done faster.
General specifications
Accuracy is specified for 1 year after calibration, at operating
temperatures of 18 °C to 28 °C, with relative humidity at
0 % to 90 %.
The accuracy specifications take the form of:
± ( [ % of reading ] + [ counts ] )
Maximum voltage between any
terminal and earth ground
600 V
Surge protection
6 kV peak per IEC 61010-1 600 V
CAT III, Pollution Degree 2
Fuse for A input
11 A, 1000 V FAST Fuse
(Fluke PN 803293)
Display
Digital: 6,000 counts, updates 4/sec
Bar graph
33 segments, updates 32/sec
Operating temperature
-10 °C to + 50 °C
Storage temperature
-40 °C to + 60 °C
Battery
9 volt Alkaline, NEDA 1604A/
IEC 6LR61
Battery life
400 hours typical, without backlight
N10140
R
Actual size
Accuracy Specifications
Measurement
Range
Resolution
Accuracy
± ([% of reading] + [counts])
DC millivolts
600.0 mV
0.1 mV
0.5 % + 2
DC volts
6.000 V
0.001 V
0.5 % + 2
60.00 V
0.01 V
600.0 V
0.1 V
Auto volts
600.0 V
0.1 V
2.0 % + 3 (dc, 45 Hz to 500 Hz)
4.0 % + 3 (500 Hz to 1 kHz)
AC millivolts
1
true-rms
600.0 mV
0.1 mV
1.0 % + 3 (dc, 45 Hz to 500 Hz)
2.0 % + 3 (500 Hz to 1 kHz)
AC volts
1
true-rms
6.000 V
0.001 V
1.0 % + 3 (45 Hz to 500 Hz)
2.0 % + 3 (500 Hz to 1 kHz)
60.00 V
0.01 V
600.0 V
0.1 V
Continuity
600 Ω
1 Ω
Beeper on <, 20 Ω off >, 250 Ω, detects
opens or shorts of 500 µs or longer.
Ohms
600.0 Ω
0.1Ω
0.9 % + 2
6.000 kΩ
0.001 kΩ
0.9 % + 1
60.00 kΩ
0.01 kΩ
600.0 kΩ
0.1 kΩ
6.000 MΩ
0.001 MΩ
40.00 MΩ
0.01 MΩ
1.5 % + 2
Diode test
2.000 V
0.001 V
0.9 % + 2
Capacitance
1000 nF
1 nF
1.9 % + 2
10.00 µF
0.01 µF
100.0 µF
0.1 µF
9999 µF
1 µF
100 µF to 1000 µF
1.9 % + 2
>, 1000 µF
5 % + 20
Lo-Z capacitance
1 nF to 500 µF
10 % + 2 typical
AC amps true-rms
(45 Hz to 500 Hz)
6.000 A
0.001 A
1.5 % + 3
10.00 A
0.01 A
20 A overload for 30 seconds max.
DC amps
6.000 A
0.001 A
1.0 % + 3
10.00 A
0.01 A
20 A overload for 30 seconds max.
Hz (V or A input)
2
99.99 Hz
0.01 Hz
0.1 % + 2
999.9 Hz
0.1 Hz
9.999 kHz
0.001 kHz
50.00 kHz
0.01 kHz
Notes:
1
All ac voltage ranges except Auto-V/LoZ are specified from 1 % to 100 % of range. Auto-V/LoZ is specified from 0.0 V.
Because inputs below 1 % of range are not specified, it is normal for this and other true-rms meters to display non-
zero readings when the test leads are disconnected from a circuit or are shorted together. For volts, crest factor of ≤ 3
at 4000 counts, decreasing linearly to 1.5 at full scale. AC volts is ac-coupled. Auto-V LoZ, and ac mV are dc-coupled.
2
Frequency is ac coupled, 5 Hz to 50 kHz for ac voltage. Frequency is dc coupled, 45 Hz to 5 kHz for ac current.
Ordering
Information
Fluke-117
Electrician’s
Multimeter with
Non-Contact Voltage
Included
TL75 Test leads, holster, User’s
manual and 9 V battery (installed).
Технические характеристики
| Manufacturer | Fluke |
|---|---|
| Condition | New |
| AC Voltage | 600 V |
| DC Voltage | 600 V |
| Resolution | 3.5 |
| Type | Handheld |
